4 Ways Plastic Pallets

4 ways plastic pallets, The basic products of the land pallet are blue, and other colors are according to pantong to customization, the MOQ for custom colors is 500; Applicable ambient temperature -25℃ to +60℃(try to avoid sun exposure and proximity to heat); The standard of land pallet is: product size error ±3%, weight error ±3%, side wall deformation rate ≤1%, the pallet plane deformation is not greater than 5mm, the rate of diagonal change of the pallet ≤1% all belong to the scope of enterprise standard, The pallet material requirements: guarantee the use of a new high quality, low temperature, weather-resistant high strength modified PP or HDPE raw materials, never use recycled materials and recycled plastic or add calcium carbonate; heavy duty pallets for sale, Quality guarantee period: Under normal and reasonable use, the quality guarantee period is three years(36 months), damage caused as a result of repeated use of the product with a broken in a same product, 4 Ways Plastic Pallets, the supplier to deal with problems arising from the use process have the duty to maintain and ruled out, therefore the domestic freight shall be borne by the supplier(product quality problems, except for human factors);

During the winter ventilation process, the minimum temperature of the storage rack and pallet warehouse is controlled at about 4℃ to avoid freezing and cracking the drainage system due to the low temperature of the groundwater in the drainage ditch. In the case of very low absolute humidity outside the warehouse, if long-term ventilation, the relative humidity of the storage rack and pallet warehouse will be reduced to below 30%. At this time, some materials are too hot and too dry, and cracks will appear in the complex structure. Therefore, ventilation can be suspended, and the ventilation can be continued after the humidity in the plastic pallet warehouse rises.

It is recommended that you follow the procedures when operating to reduce safety hazards. Use blow-molded pallets to perform drop angle tests and drop surface tests at high altitudes. There is no damage at a certain height, and the high-altitude drop angle will be damaged, but it does not affect the use. export pallet dimensions, Violent hammer beating: In the process of violent operation, it can be seen that the impact resistance of the blow molding process pallet is much better than that of the injection molding pallet. Fully loaded forklift use: Forklift used together, blow-molded pallet 1412 dynamic load test of 2 tons. In the test, the pallet was not deformed or bent, and the goods on the pallet were not scattered, and the performance was good.

Hot Tags: 4 ways plastic pallets, China, manufacturer, suppliers, factory, wholesale, customized, price