The correct use of plastic trays:
First, the correct use of plastic trays and scope: 1, carrying range: dynamic load 1500kg static load 4000kg: 2, the use of temperature range: minus 25 °C to between zero and 50 °C; 3, insert speed: ≤ 2 km / h 4, the working height: 30mm-1500mm: 5, plug arm size diameter: should be greater than 680mm; 6, lifting level: tilt angle is less than ∠15 °.
Second, the use of plastic trays Note:
1. It is not allowed to fall at high altitude. After the plastic pallet emptys the load, it cannot be thrown, hit or thrown.
2. The plastic pallets cannot be forked at high speed during use. The speed of the forklift should be less than 2km/h to enter the fork so as not to damage the pallet at high speed.
3. The use of plastic pallets Forklift is a fork arm should be slightly smaller than the two fork 5 - 10cm, more than 10cm will cause damage to the overall structure of the tray (because the fork arm spacing is too small, causing the tray to bend).
4. During the use of the plastic tray, the dynamic load and static load of the plastic tray shall not exceed the calibrated dynamic load of the plastic tray so as to avoid the aging progress of the plastic tray, resulting in premature damage of the plastic tray.