1. About , covers an area of big and predominantly horizontal transport situation, forklift, if use manual hydraulic pallet transfer car transfer for choose single tray. If need stacking goods, the goods to the bottom of the tray and below the collocated, with double tray type or field words at the end of the single tray is good. If use can transfer car transfer of motor tray is suitable for the bottom without cohesion article 9 foot type single pallet.
2. As for the active three-dimensional storage or high shelf with small area, single-side shelf series pallets and double-side shelf series pallets can be selected on the occasions where the stacker or electric forklift truck transfers the goods in a straight line.
3, double-sided plastic pallet refers to the positive and negative double-sided structure of the pallet, the surface has a grid shape and plate shape two, double-sided interchangeable use, according to the bearing capacity and use of the occasion is not the same as the shelf series and standard series of two specifications.
4, if in the three-dimensional library or shelf load up to 1 t, and shelf no ceiling, steel tube with built-in shelf tray. Steel pipe gangsu structure tray deal effectively with the built-in shelves the greater the load weight of products, capital high old question, more major is used at the mercy of square steel tube wall thickness of 2 mm of rigidity, reached on the shelves of horizontal and vertical deflection are 10 mm or less strict requirements, cut with permanent deformation, to reduce the capital.
5, single-sided plastic pallet can only be used on one side, the surface of the grid shape and plate shape of two kinds, the bottom of the dragon forklift, there are sichuan type, field type or nine square foot type, according to the bearing capacity and use of different occasions divided into shelf series, standard series and ultra-light series three specifications.
6, the choice of single-sided pallet or double-sided pallet, should be based on the corresponding storage, loading and unloading transfer equipment and conditions to determine.