Keep the warehouse floor, blow-molded pallets and goods tidy, reduce dust, and prevent moisture in the space from condensing into small water droplets. In a humid environment, try to clean the warehouse with less damp things and use dry rags and dry mops more. Measure and observe the humidity. When the humidity in the warehouse is significantly higher than the temperature outside the warehouse, timely ventilation is required. If the humidity is high, it is similar to going back to Nantian, and bags of quicklime can be used everywhere in the warehouse. It can absorb moisture and keep the warehouse dry.
For warehouses with powerful fans, you can turn on the fans to enhance air flow to reduce condensation. For warehouses with exhaust fans, keep the fans turned on. Cargo containing paper is not easy to be stacked too densely. Good air circulation is not easy to accumulate moisture and produce mildew. The goods should be placed on blow-molded pallets or other countertops as much as possible and checked regularly. Don't put it directly on the ground, so the bottom is prone to mildew. The cargo should not be stacked as high as possible. If the outer shell becomes soft, the stacking layer of the cargo will be lower. Stacking according to the original method is prone to breakage. If the surface of the goods is damp, it can be clearly seen from the sealing glue, and it must be wiped and dehumidified in time. Do not cover the cargo with airtight products such as plastic film, because these films are easy to condense water