It is called according to the surface shape of the pallet. The surface of the pallet is flat, so it is called a flat plastic pallet. Flat plastic pallets are widely used in various industries such as medicine, instant food, papermaking, and flour, and some of the flat plastic pallets can be built with steel pipes to enhance the load-bearing effect.
Specification:
1.3runners flat plastic pallet;
2.6runners flat plastic pallet;
3. Nine-feet flat plastic pallet;
4. Double-sided flat plastic pallet;
5. Heptagonal flat plastic pallet;
6. Small flat pad board.
Model:
1. 3runners plastic pallet tablet series:
①, 1100*1100*150mm;
②, 1200*800*160mm;
③、1200*1000*150(160)mm;
2. 6runners flat panel series: ①, 1200*1000*140mm;
3. Nine-feet flat plate series: ①, 1200*1000*140mm;
4. Double-sided flat panel series: ①, 1200*1000*150mm;
5. Seven-angle flat series
①, 1150*735*150mm; ②, 1150*725*150mm;
③、1125*700*150mm;④、1200*800*150mm;
6. Small flat pad board
①, 1200*1000*76mm;
②, 1400*1200*76mm;
③、1500*1500*76mm.
Material:
There are two types of HDPE (low-pressure high-density polyethylene) and PP (polypropylene). Polyethylene has a good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, good mechanical strength, dielectric properties, and environmental stress cracking resistance.
Forming principle:
The flat plastic pallet is solidified and formed by injecting the molten material in the barrel with the screw or plunger of the injection machine and injecting it into the cavity through the pouring system from the nozzle of the injection machine to the mold.
The production process and process of injection pallet:
After injection molding, it is produced according to the technological process:
a mold closing b, injection c, pressure holding d, cooling e, mold opening f, take out the product
Some pallet products are also manufactured by injection molding or foaming technology.
